hlc series hypertronics corporation toll free: 1-800-225-9228 tel: 978-568-0451 fax: 978-568-0680 www.hypertronics.com 5 / 3 materials receptacle, plug and socket insert : polyamide color - black plug cover and bezel : polycarbonate resin colour - black contacts (excluding socket wires) : copper alloy socket wires : beryllium copper plating finishes contact surfaces : 0.25 - 0.35 m gold, (excluding socket wires) over 2.0 m nickel, over 2.0 m copper socket wires : 1.27 m min. gold, over 1.27 m nickel, over 0.25 m copper mechanical contact retention : 3 lbf min latch retention (inc contacts) : 5 lbf min. (static) 75g x 1m drop min. (dynamic) insertion and extraction forces : individual contacts : 20g - 60g connector (excluding latch) : 3 lbf min electrical current rating : 4 amp per contact contact resistance : 15 m max environmental sealing : ip64 & ip67 male socket only mating cycles (contacts) : 500 min (harsh environment) : 20,000 min (benign environment) mating cycles (latch) : 1000 min temperature range : -55 to 125 0 c flammability rating : v0 (ul94) performance specifications hlc data transfer connector d-sub derivative design 11-pin, 4 amps per contact available in ip64 and ip67 protective classes optional keying features for plug discrimination molded strain relief for cable mounted plug latching device to avoid unintential separation 3 termination styles available: 90?pcb (1.4mm and 2.9mm, solder bucket) hypertronics catalog sec 5 5/1/06 9:47 am page 3
hlc series hypertronics corporation toll free: 1-800-225-9228 tel: 978-568-0451 fax: 978-568-0680 www.hypertronics.com 5 / 4 35.1 14.6 10.9 3.0 ?0.8 ?0.8 cable entry pcb layout board thickness: 0.8mm max (1.4 termination) 2.3mm max (2.9 termination) panel cut-out panel thickness: 3.2mm max 8.64 7.00 max 1.75 4.80 2.60 2 plcs 25.00 18.40 80 0 2 plcs r 2.90 2 plcs 25.00 9.60 7.50 10.00 type a keying shown termination detail (no to scale) plug connector 0.60 11 plcs 1.00 2.00 hlc 100 ? a ?? hlc 101 ? b ?? hlc 102 ? o ?? hlc 103 ? b ?? hlc 105 ? a ?? hlc 106 ? o ?? hlc 202 ? a ?? hlc 203 ? b ?? hlc 300 ? a ?? hlc 301 ? b ?? hlc 302 ? o ?? hlc 303 ? b ?? hlc 308 ? a ?? hlc 309 ? o ?? hlc 310 ? b ?? hlc 311 ? a ?? hlc 312 ? o ?? part no plug receptacle keying ip64 ip67 solder 90 0 x90 0 x pins bucket 1.4mm 2.9mm pwb pin pwb pin pc-103-m = keying bezel, type a only and will fit to any non keyed receptacle pc-102-m = keying bezel, type b only and will fit to any non keyed receptacle keying bezels can be removed or added or changed after fitting the receptacle to your equipment keying a is keyed to the left with the receptacle facing you and the keyway located on the bottom edge keying b is keyed to the right with the receptacle facing you and the keyway located on the bottom edge keying o keyed to both the left and right with the receptacle facing you, hence it will accept both the type a and b plugs keying a and b on plugs are keyed the opposite side to their respective a and b receptacles with the plug facing you and the latch to the bottom hlc connector ordering information ?2.6 0.5 solder bucket option. detail as plug pcb mounting position receptacle connector 4.3 3.5 25.0 10.3 7.25 ?0.4 30.8 12.5 6.25 keying bezel type a keying shown 1.4 or 2.9mm or solder bucket ?2.6 csk ?5.0 connector dimensions hypertronics catalog sec 5 5/1/06 9:47 am page 4
|
